The Battery in the Kit is Shipped in offline mode. You will need to depress the switch five times rapidly to activate online mode. The LED Ring will flash three times to indicate the Battery is in Online mode.
- Once your Clearomizer has been filled and fully assembled, screw the battery and Clearomizer together in a clockwise motion.
- Depress the switch and hold down as you inhale on the mouthpiece. You’re vaping!
- To turn the device off, depress the switch five times again.
- Unscrew the combined Mid-Ring and VaporCoil from the Clearomizer in a anticlockwise motion.
- With the Clearomizer mouthpiece pointing downwards, place the nozzle inside, avoiding the centre air tube.
- Screw the battery into the supplied USB charger and plug into a USB socket
ONLY USE THE USB CHARGER PROVIDED IN THE STARTER KIT
- The LED ring on the battery will flash three times, and the USB charger LED will turn a solid LED.
- After charging for approximately 1 hour, the USB charger LED will turn a solid GREEN to indicate the charging process is complete.
REPLACING THE VAPORCOIL
- Unscrew the combined Mid-Ring and VaporCoil from the Clearomizer.
- Holding the centre pin of the VaporCoil screw anti-clockwise to remove, and clockwise to attach.
- Rescrew the combined Mid-Ring and VaporCoil back on to the Clearomizer.
To view this guide with images please CLICK HERE